 |
 |
 |
Model 640
This
straight-line action clamp is designed for heavy-duty service and offers
a full 4” plunger travel, the longest of all the DE-STA-CO 600 series
straight-line action clamps. the 7/8” diameter plunger is drilled
and taped for a 1/2-13 adjustment spindle and locks in either the extended
or retracted position. The low silhoutte clamp is only 4 3/8” high
for use where overhead clearance is a problem. Supplied with ergonomic
handle grip. Metric Plunger available with M12 internal thread.
56400 Model 640 |
| ALSO AVAILABLE | ||
| With Metric Plunger | Model 640-M | Click here to view page. |
MODEL 650
Largest
holding cpacity of the straight-line action clamps. Model 650 is precision
built with forged alloy steel handle and base. Snap ring pivot pin construction
allows easy removal of plunger even after uint is mounted. Locks in either
the extended or retracted position. Plunger is tapped to accept any 5/8-11
spindle or detail. Metric Plunger available with M16 internal thread.
56500 Model 650 |
| ALSO AVAILABLE | ||
| As Air/Hydraulic | Model 850 | Click here to view page. |
| With Metric Plunger | Model 650-M | Click here to view page. |
| Model No. |
EDP No. |
Holding Capacity |
Weight |
Plunger |
Plunger Thread |
Dimensions | |||||||||
| A | B | C | D | E | F | G | H | J | M | ||||||
| 640 | 56400 | 7500 lbs. | 6.71 lbs. | 4.00” | 1/2-13 | 4.38 | 12.62 | 1.25 | 3.56 | 2.12 | 8.50 | 3.00 | 4.12 | .41 | .88 |
| 650 | 56500 | 16000 lbs. | 5.59 lbs. | 3.00” | 5/8-11 | 4.88 | 11.25 | 2.25 | 2.75 | 2.25 | - | 3.13 | 6.25 | .41 | 1.00 |
