 |
 |
 |
Model
830, 830-10
The 5/8" diameter plunger travels forward 1 14/"
from an open to a closed and locked position. The Model 830 is also available
in an alternate configuration as Model 830-10 which locks in the retracted
position only and has a plunger travel of 3/4". Plunger is drilled
and tapped to accept a 3/8-16 spindle (not supplied) or to receive your
custom fixture.
 |
| ALSO AVAILABLE | |
| With Magnetic Ring | Model
830-MR Model 830-10-MR |
Model
850
Largest of the straight-line actions, this model has a
full 1" diameter plunger that extends 2" and goes into a mechanical
lock. A 3/8" thick steel base provides rigidity and can be welded
or bolted in position. Snap ring construction permits easy removal of
the plunger without disassembling the entire unit. End of plunger accommodates
any 5/8-11 spindle assembly (not supplied).
 |
| ALSO AVAILABLE | |
| With Magnetic Ring | Model 850-MR |
| Model No. |
EDP No. |
Holding Capacity |
Weight | Plunger
Travel |
Plunger Thread |
Dimensions | |||||||||
| A | B | C | D | D1 | E | F | H | J | Port
Size |
||||||
| 830 | 58300 | 2500 lbs. | 6.14 lbs | 1.25 | 3/8-16 | 3.25 | 14.19 | 1.06 | 1.38 | 1.63 | 1.63 | 0.63 | 2.00 | 0.31 | 1/8 NPT* |
| 830-10 | 58301 | 2500 lbs. | 6.40 lbs. | .75 | 3/8-16 | 3.25 | 14.19 | 1.06 | 1.38 | 1.63 | 1.63 | 0.63 | 2.00 | 0.31 | 1/8 NPT* |
| 850 | 58500 | 16000 lbs. | 16.60 lbs. | 2.00 | 5/8-11 | 7.50 | 21.00 | 2.63 | 2.75 | - | 2.25 | 1.00 | 4.50 | .038 | 1/8 NPT* |
*Restrictor fittings supplied that must be installed on clamp cylinder
Click here for Technical Information
