 |
 |
 |
| Model No. |
EDP No. | Cylinder Bore |
Cylinder Area |
Maximum Inlet Pressure at Max. MA* |
Mechanical Advantage (MA) |
Exerting
Force at 80 PSIG |
| 802 | 58020 | 1.13 | 0.994 sq. in. | 40 psig | 2:1 to 5:1 | 160/200 lbs. |
| 807-L | 58071 | 1.13 | 0.994 sq. in. | 80 psig | 2:1 to 6:1 | 150/500 lbs. |
| 807-UL | 58070 | 1.13 | 0.994 sq. in. | 55 psig | 3:1 to 6:1 | 150/350 lbs. |
| 810-S | 58101 | 1.50 | 1.767 sq. in. | 80 psig | 2.9:1 to 5:1 | 400/700 lbs. |
| 810-U | 58100 | 1.50 | 1.767 sq. in. | 70 psig | 2.9:1 to 5:1 | 400/600 lbs. |
| 812 | 58120 | 0.75 | 0.441 sq. in. | 80 psig | 2.7:1 to 3.8:1 | 98/135 lbs. |
| 846 | 58460 | 1.50 | 1.767 sq. in. | 125 psig | 3.5:1 to 5.6:1 | 500/750 lbs. |
| 847-S | 58471 | 2.00 | 3.141 sq. in. | 80 psig | 1.8:1 to 4:1 | 450/1000 lbs. |
| 847-U | 58470 | 2.00 | 3.141 sq. in. | 60 psig | 1.8:1 to 4:1 | 450/750 lbs. |
| 849 | 58490 | 2.50 | 4.903 sq. in. | 125 psig | 1.7:1 to 2:1 | 1000/1200 lbs. |
| 858 | 58580 | 2.50 | 4.903 sq. in. | 200 psig | 2.3:1 to 4:1 | 900/1600 lbs. |
| 8071 | 58080 | 1.50 | 1.767 sq. in. | 105 psig | 2.4:1 to 4.2:1 | 250/450 lbs. |
| Model No. |
EDP No. |
Cylinder
Bore |
Cylinder Area | Maximum Inlet Pressure at Max. MA* |
Mechanical Advantage (MA) |
Exerting
Force at 80 PSIG |
| 817-S | 58171 | 1.13 | 0.994 sq. in. | 100 psig | 2.5:1 to 4:1 | 200/400 lbs. |
| 817-U | 58170 | 1.13 | 0.994 sq. in. | 80 psig | 2.5:1 to 4:1 | 200/320 lbs. |
| 827-S | 58271 | 1.50 | 1.767 sq. in. | 110 psig | 2:1 to 3.5:1 | 300/500 lbs. |
| 827-U | 58270 | 1.50 | 1.767 sq. in. | 95 psig | 2:1 to 3.5:1 | 300/500 lbs. |
| 868 | 58680 | 2.50 | 4.903 sq. in. | 200 psig | 2.3:1 to 4:1 | 900/1600 lbs. |
| Model No. |
EDP No. |
Cylinder
Bore |
Cylinder Area | Maximum Inlet Pressure at Max. MA* |
Mechanical Advantage (MA) |
Exerting
Force at 80 PSIG |
| 803 | 58030 | 1.13 | 0.994 sq. in. | 80 psig | 7.5:1 | 600 lbs. |
| 816 | 58160 | 0.75 | 0.441 sq. in. | 60 psig | 5.5:1 | 190 lbs. |
| 830 | 58300 | 1.50 | 1.767 sq. in. | 145 psig | 9.8:1 | 2100 lbs. |
| 830-10 | 58301 | 1.50 | 1.461 sq. in. | 125 psig | 8.1:1 | 1700 lbs. |
| 850 | 58500 | 2.50 | 4.930 sq. in. | 125 psig | 3.1:1 | 1200 lbs. |
*All power clamps may also be used with hydraulic oil as the pressure medium, but in no case should the inlet pressure be high enough to create an exerting force that exceeds the clamp's maximum holding capacity.
