For
Product Information Call M J Vail Company
 |
|
|
|
| PNEUMATIC
CLAMPS & SYSTEMS |
 |
| Introduction |
|
PNEUMATIC
SWING CYLINDERS
Clamping
Force
| Series
8000/8100 |
|
Series
8200/8300 |
| A...(2.87) |
LONG
ARM |
(3.75)....D |
| B...(1.75 |
STANDARD
ARM |
(2.75)....E |
| C |
NO
ARM
(STRAIGHT PULL)
T-ARM |
F |
|
|
MOUNTING
OPTIONS
Swing Cylinder Rotation: Frame of reference for specifying rotation
the the clamp are viewed from above during the clamping stroke. A right
hand unit rotates clockwise and then clamps down; a left hand unit rotates
counter clockwise and then clamps down. |
|
- Threaded
body in a tapped hole. Position is locked by a single cap screw
into a tapped hole in fixture.
- Cylinder
body passes through a clearance hole. Three mounting screws
pass through the top flange into holes tapped in fixture.
- Optional
mounting block 821553 may be used above or below the work surface.
Clamp height is easily adjusted.
|
- Can
be mounted to the side or front of the fixture, or mounted back
to back for multiple clamping operations.
- Mounted
to the top of the work surface through two mounting holes in bottom
of unit.
|
|
|
|
|
  |
